Tarik clamp rod
Genggeman pipa genggeman kalebu telu nganti papat tarik tarik sing bisa nyuda kekuatan pipa sing efektif. Kombinasi sing cocog kanggo narik rod lan gabung kanthi geter, swara murah uga nyedhiyakake ganti rugi. Instalasi Gampang lan Cepet Cepet nggawe genggeman sing bisa dipercaya kanggo sampeyan.
Cocog kanggo pipa φ304-φ762mm
Genggeman-LM mung bisa digunakake ing pipa logam.
Paramèter teknis grip-lm
| Pipa diameteripun njaba | Range Clamping | Meksa kerja | Product OD | Jembaré | Distance betway Slips Sealing | Setting Gap ing antarane Pipa End | Tarif torsi | Bolt | |||
| Od | Min-Max |  |  | Φ d | B | C | tanpa insert Strip | Kanthi insert Strip | |||
| (Mm) | (Ing.) | (Mm) | (bar) | (bar) | (mm) | (mm) | (mm) | (mm) | (mm) | (Nm) | M |
| 180 | 7.087 | 166-171 | 16 | 30 | 202 | 142 | 75 | 10 ~ 25 | 40 | 50 | |
| 200 | 7.874 | 198-202 | 16 | 30 | 222 | 142 | 75 | 10 ~ 25 | 40 | 50 | |
| 219.1 | 8.626 | 216-222 | 16 | 30 | 249.1 | 142 | 75 | 10 ~ 25 | 40 | 60 | |
| 250 | 9.843 | 247-253 | 16 | 25 | 280 | 142 | 75 | 10 ~ 25 | 40 | 60 | |
| 267 | 10.512 | 264-270 | 16 | 25 | 297 | 142 | 75 | 10 ~ 25 | 40 | 60 | |
| 273 | 10.748 | 270-276 | 16 | 25 | 303 | 142 | 75 | 10 ~ 25 | 40 | 60 | |
| 304 | 11.969 | 301-307 | 10 | 20 | 334 | 142 | 75 | 10 ~ 25 | 40 | 80 | M12 × 2 |
| 323.9 | 12,752 | 320-327 | 10 | 20 | 353 | 142 | 75 | 10 ~ 25 | 40 | 80 | |
| 355.6 | 14.000 | 352-359 | 8.5 | 16 | 385.6 | 142 | 75 | 10 ~ 25 | 40 | 80 | |
| 377 | 14.843 | 375-379 | 8.5 | 16 | 407 | 142 | 75 | 10 ~ 25 | 40 | 80 | |
| 406.4 | 16.000 | 402-411 | 7,5 | 16 | 436 | 142 | 75 | 10 ~ 25 | 40 | 80 | |
| 457.2 | 18.000 | 452-462 | 6.5 | 16 | 487 | 142 | 75 | 10 ~ 25 | 40 | 80 | |
| 508 | 20.000 | 503-513 | 6 | 12 | 538 | 142 | 75 | 10 ~ 25 | 40 | 120 | M16 * 2 |
| 558.8 | 22.000 | 554-564 | 5.5 | 10 | 588.8 | 142 | 75 | 10 ~ 25 | 40 | 160 | |
| 609.6 | 24.000 | 605-615 | 5 | 10 | 639.6 | 142 | 75 | 10 ~ 25 | 40 | 160 | |
| 711.2 | 28.000 | 708-715 | 4 | 5 | 741.2 | 142 | 75 | 10 ~ 25 | 40 | 160 | |
| 762 | 30.000 | 758-766 | 4 | 5 | 792 | 142 | 75 | 10 ~ 25 | 40 | 160 | |
Pilihan Bahan Genggeman
| Komponen Bahan | V1 | V2 | V3 | V4 | V5 | V6 |
| Casing | AISE 304 | AISI 316L | Aisi 316ti | AISI 316L | Aisi 316ti | AISE 304 |
| Bolts | AISE 304 | AISI 316L | AISI 316L | AISE 304 | AISE 304 | Aisi 4135 |
| Bar | AISE 304 | AISI 316L | AISI 316L | AISE 304 | AISE 304 | Aisi 4135 |
| Cincin Anchoring | ||||||
| Insert Strip (Opsional) | AIIS 301 | AIIS 301 | AIIS 301 | AIIS 301 | AIIS 301 |
Bahan Gasket Karet
| Bahan Segel | Media | Range Suhu |
| Epdm | Kabeh kualitas banyu, banyu sampah, udhara, padhet lan produk kimia | -30 ℃ nganti + 120 ℃ |
| Nbr | Banyu, Gas, Minyak, Bahan Bakar lan Hydrocabons liyane | -30 ℃ Nganti + 120 ℃ |
| MVQ | Cairan suhu, oksigen, ozon, banyu lan liya-liyane | -70 ℃ nganti + 260 ℃ |
| FPM / FKM | Ozon, oksigen, asam, gas, minyak lan bahan bakar (mung nganggo insert Strip) | 95 ℃ nganti + 300 ℃ |
GRIP-LM is the deformation of G type, based on GRIP-G to improve better performance of GRIP-G for large pipes outside diameters above 300mm, deleted two anchoring and added three pull rods, which can effectively reduce the axial pull strength of pipes Waca rangkeng-.
Gabungan sing cocog saka tarik rod lan kelupan kanthi geter nyuda geter, swara murah uga menehi ganti rugi.
